Volume 103, Issue 1 p. 176-182
ORIGINAL ARTICLE

Liquid and amorphous states of boron subarsenide

Murat Durandurdu

Corresponding Author

Murat Durandurdu

Department of Materials Science & Nanotechnology Engineering, Abdullah Gül University, Kayseri, Turkey

Correspondence

Murat Durandurdu, Department of Materials Science & Nanotechnology Engineering, Abdullah Gül University, Kayseri, Turkey.

Email: [email protected]

Search for more papers by this author
First published: 05 August 2019
Citations: 1

Abstract

Ab initio molecular dynamics simulations are executed to probe the short-range order and the electrical features of the liquid and amorphous boron subarsenide (B12As2). A drastic volume swelling of ~40% is witnessed for the liquid state, relative to the crystal. The density of the melt is found to be close to that of liquid boron. As the temperature applied is gradually decreased, the volume progressively decreases and a glass-transition zone at around 1400 K is observed. About 14% volume expansion is perceived for the amorphous phase. Due to the drastic density (volume) difference between the liquid and amorphous forms, their atomic structure is found to be different from each other. In the liquid phase at 2500 K, the mean coordination number (CN) of B and As atoms is 4.4 and 2.5, correspondingly. During the solidification process, both average CNs steadily increase and reach values of 5.5 (B-atom) and 4.14 (As-atom) at 300 K. The pentagonal pyramid-like motifs barely survive at 2500 K but during the quenching process they develop progressively and some of which lead to the formation of B12 clusters. In the amorphous state, the chain-like and A7-like As-As clusters are observed. Nonetheless, the noncrystalline state is proposed to be partially similar to the crystalline structure. The liquid state shows a metallic character while the amorphous form presents a semiconducting nature having an energy band gap much smaller than that of the crystalline phase.